The Never-Ending Relation Of Functionality And Trade Dress

Flexible Steel Lacing Co. (“Flexco”) filed a civil action against Conveyor Accessories (“CAI”) for trade dress infringement and unfair competition under the Lanham Act, Common Law, and Illinois Uniform Deceptive Trade Practices Act at the United States District Court for the Northern District of Illinois, Eastern Division (“District Court”). Flexco and CAI are competitors in the belt conveyor industry. The belt conveyors are used in several handling applications, for instance, transporting coal, moving groceries, etc. Many belt conveyor systems use an endless flexible rubber belt comprised of multiple high-strength rubber belt segments that are spliced together. In the suit before the district court, Flexco contended that the CAI infringed its registered and common law trade dress because CAI sells and promotes the conveyor belt fasteners with a design, which is confusingly similar to the product of Flexco. The CAI moved for the summary judgment and contended that Flexco’s trade dress is invalid because it is functional in nature. Flexco sought partial summary judgment on other grounds. Subsequently, both parties filed their reply. The district court granted the summary judgment in favor of CAI and held that the trade dress of Flexco was functional and hence it was invalid. Discontented with the verdict of the district court, Flexco filed this appeal at the United States Court of Appeals for the Seventh Circuit (“Appellate Court”) (Flexible Steel Lacing Co. v. Conveyor Accessories, Inc 955 F.3d 632 (7th Cir. 2020)) which affirmed the district court ruling.

The district court in its summary judgment held that there were utilitarian advantages derived from the features of the utility patent and Flexco’s own advertisement emphasized the functional benefit of the trade dress, which could also be observed from Felxco’s internal communications and its sworn declarations submitted at the USPTO. The appellate court after perusing the summary judgment and referring to GeorgiaPacific Consumer Prod LP v. Kimber‐lyClark Corp., 647 F.3d 723, 727 (7th Cir. 2011), held that summary judgment is suitable in case where there is no genuine dispute related to material fact and the movant is entitled to judgment as a matter of law. It was observed that in the instant case, the issue of functionality is involved, which is a factual question, but the bar for functionality is so low that it can often be decided as a matter of law. And as per the Lanham Act interpretation, the registration of a trademark creates a rebuttable presumption that the mark is valid until evidence of invalidity is present. For the question of determination of functional design, the following things are taken into consideration “(1) the existence of a utility patent, expired or unexpired, that involves or describes the functionality of an item’s design element; (2) the utilitarian properties of the item’s unpatented design elements; (3) advertising of the item that touts the utilitarian advantages of the item’s design elements; (4) the dearth of, or difficulty in creating, alternative designs for the item’s purpose; (5) the effect of the design feature on an item’s quality or cost.”

Flexco argued that, despite the utility patent “undeniably describes how a ‘scalloped’ edge provides a better bite and a lower fastener profile,” it does so only in “reference to the fastener’s [two convex curves]” and not in terms of its trade dress, the center scallop. Its second contention was that the utility patent is not an evidence for functionality because it does not require a center scallop to accommodate an installation tool. However, the court disagreed with the contention that the utility patent refers solely to the two convex leading-edge fasteners to improve the bite and profile of the fastener. The Court also denied that the utilitarian functions disclosed by the patent are limited to the two-rivet fastener, thereby agreeing with the district court’s observation that review could not be limited to any particular fastener. Flexco further contended that the statement to the USPTO, the advertisement and the utility patent create factual issues related to the functionality of the trade dress that must be resolved by the jury. Nevertheless, the appellate court found these contentions and assertions contrary to the evidence obtained from Flexco’s internal testing, marketing material, utility patent, declarations given to USPTO because they demonstrated the utilitarian features of Flexco’s trade dress. The evidence of alternative designs was also found to be misapprehended by Flexco who argued that summary judgment was improper because of “conflicting evidence that CAI’s competing fastener has a flat bottomed, trapezoid shaped ‘notch’ and that its president confessed works just as good as Flexco’s curved center scallop” and “that any suitably sized space between the [two convex curves] of these competing fasteners, regardless of its shape, can perform the same function. The Court was of the opinion that as per the TrafFix, 532 U.S. at 33; Specialized Seating, Inc. v. Greenwich Indus., L.P., 616 F.3d 722, 726–27(7th Circuit, 2010),no plea of possibility of alternative design ought to be considered where functionality is established. It was further submitted by Flexco that the center scallop could be of any shape as long as it had the same area or more to displace the same amount of rubber. But the court pointed to the case ofGeorgiaPacific, 647 F.3d at 727 (quoting Door Sys., Inc. v. ProLine Door Sys., Inc., 83 F.3d 169, 172 (7th Cir. 1996))wherein it specifically disagreed with this line of argument. In accordance with the reasoning provided in aforesaid judgement, the courtheld that there might be numerous alternative designs for the space between the two convex curves of the metal fastener.

Therefore, in view of all these rationales, the appellate court affirmed the summary judgment of the district court favoring CAI and held that the trademark of Flexco was functional and hence it was invalid.

Author: Saransh Chaturvedi (Advocate, LLM (IIT Kharagpur) – an associate at Khurana & Khurana, Advocates and IP Attorney,  in case of any queries please contact/write back to us via email saransh@iiprd.com.

Leave a Reply

Categories

Archives

  • March 2024
  • February 2024
  • January 2024
  • December 2023
  • November 2023
  • October 2023
  • September 2023
  • August 2023
  • July 2023
  • June 2023
  • May 2023
  • April 2023
  • March 2023
  • February 2023
  • January 2023
  • December 2022
  • November 2022
  • October 2022
  • September 2022
  • August 2022
  • July 2022
  • June 2022
  • May 2022
  • April 2022
  • March 2022
  • February 2022
  • January 2022
  • December 2021
  • November 2021
  • October 2021
  • September 2021
  • August 2021
  • July 2021
  • June 2021
  • May 2021
  • April 2021
  • March 2021
  • February 2021
  • January 2021
  • December 2020
  • November 2020
  • October 2020
  • September 2020
  • August 2020
  • July 2020
  • June 2020
  • May 2020
  • April 2020
  • March 2020
  • February 2020
  • January 2020
  • December 2019
  • November 2019
  • October 2019
  • September 2019
  • August 2019
  • July 2019
  • June 2019
  • May 2019
  • April 2019
  • March 2019
  • February 2019
  • January 2019
  • December 2018
  • November 2018
  • October 2018
  • September 2018
  • August 2018
  • July 2018
  • June 2018
  • May 2018
  • April 2018
  • March 2018
  • February 2018
  • January 2018
  • December 2017
  • November 2017
  • September 2017
  • August 2017
  • July 2017
  • June 2017
  • May 2017
  • April 2017
  • March 2017
  • February 2017
  • January 2017
  • December 2016
  • November 2016
  • October 2016
  • September 2016
  • August 2016
  • July 2016
  • June 2016
  • May 2016
  • April 2016
  • March 2016
  • February 2016
  • January 2016
  • December 2015
  • November 2015
  • October 2015
  • September 2015
  • August 2015
  • July 2015
  • June 2015
  • May 2015
  • April 2015
  • March 2015
  • February 2015
  • January 2015
  • December 2014
  • November 2014
  • October 2014
  • September 2014
  • August 2014
  • July 2014
  • June 2014
  • May 2014
  • April 2014
  • March 2014
  • February 2014
  • January 2014
  • December 2013
  • November 2013
  • October 2013
  • September 2013
  • August 2013
  • July 2013
  • June 2013
  • May 2013
  • April 2013
  • March 2013
  • February 2013
  • January 2013
  • December 2012
  • November 2012
  • September 2012
  • August 2012
  • July 2012
  • June 2012
  • May 2012
  • April 2012
  • March 2012
  • February 2012
  • January 2012
  • December 2011
  • November 2011
  • October 2011
  • September 2011
  • August 2011
  • July 2011
  • June 2011
  • May 2011
  • April 2011
  • March 2011
  • February 2011
  • January 2011
  • December 2010
  • September 2010
  • July 2010
  • June 2010
  • May 2010
  • April 2010